SAE AMS5660 Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings, 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B
作者:标准资料网 时间:2024-05-19 10:07:44 浏览:9897
来源:标准资料网
Product Code:SAE AMS5660
Title:Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings, 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe, Consumable Electrode Remelted or Vacuum Induction Melted, Solution, Stabilization, and Precipitation Heat Treated
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion and heat-resistant nickel-iron alloy in the form of bars, forgings, and forging stock.
Product Code:SAE J476
Title:Dryseal Pipe Threads
Issuing Committee:Fasteners Committee
Scope: The Dryseal American Standard Taper Pipe Thread, the Dryseal American Fuel Internal Straight Pipe Thread and the Dryseal American Intermediate Internal Straight Pipe Thread covered by this standard conform with the American Standard ASA-B2.2. The Dryseal SAE-Short Taper Pipe Thread in this standard conforms with the Dryseal American Standard Taper Pipe Thread except for the length of thread, which is shortened for increased clearance and economy of material.The significant feature of the Dryseal thread is controlled truncation at the crest and root to assure metal to metal contact coincident with or prior to flank contact. Contact at the crest and root prevents spiral leakage and insures pressure-tight joints without the use of a lubricant or sealer. Lubricants, if not functionally objectionable, may be used to minimize the possibility of galling in assembly.
Rationale: The Dryseal American Standard Taper Pipe Thread, the Dryseal American Fuel Internal Straight Pipe Thread and the Dryseal American Intermediate Internal Straight Pipe Thread covered by this standard conform with the American Standard ASA-B2.2. The Dryseal SAE-Short Taper Pipe Thread in this standard conforms with the Dryseal American Standard Taper Pipe Thread except for the length of thread, which is shortened for increased clearance and economy of material.The significant feature of the Dryseal thread is controlled truncation at the crest and root to assure metal to metal contact coincident with or prior to flank contact. Contact at the crest and root prevents spiral leakage and insures pressure-tight joints without the use of a lubricant or sealer. Lubricants, if not functionally objectionable, may be used to minimize the possibility of galling in assembly.Product Code:SAE AMS5879
Title:Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Foil, 62Ni - 21.5Cr - 9.0Mo - 3.7Cb, Cold Rolled and Annealed
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet, strip, and foil 0.100 inch (2.54 mm) and under in nominal thickness.
