设为首页|加入收藏

• 首 页
• 美军标 MIL
• 国际标准
• 协会标准
• 国内标准
• 论 坛

DIN EN ISO 14579-2002 圆柱头内六角螺钉(ISO14579:2001);德文版本ENISO14579:2001

上一篇: BS EN 13724-2002 邮政服务业务.私人信箱和信箱投信口金属板缝隙.要求和试验方法
下一篇: DIN EN ISO 14584-2002 半埋头内六角螺钉(ISO14584:2001);德文版本ENISO14584:2001

Product Code:SAE ARP1109
Title:Dynamic Testing Systems for Oxygen Breathing Equipment
Issuing Committee:A-10 Aircraft Oxygen Equipment Committee
Scope: This SAE Aerospace Recommended Practice (ARP) recommends performance requirements for test equipment used in dynamic testing of aviation oxygen breathing equipment. This document describes test equipment and methods used for testing continuous flow, demand and pressure demand regulators and their associated masks as well as filtered protective breathing devices; such articles of oxygen breathing or protective breathing equipment may be tested as individual components or as a complete system. This recommended practice covers but is not limited to the following types and classes of systems: Type I - mechanical breathing simulator (either bellows or piston type) only generating sinusoidal patterns; Type II - mechanical breathing simulator (generally cam-actuated, bellows or piston type or pre-programmed, servocontrolled) generating any shape of breathing pattern; and Type III - pneumatic breathing simulator pre-programmed, servocontrolled generating any shape of breathing pattern; Class A - military aircraft oxygen systems; and Class B - transport category and general aviation oxygen systems.
Rationale: This SAE Aerospace Recommended Practice (ARP) recommends performance requirements for test equipment used in dynamic testing of aviation oxygen breathing equipment. This document describes test equipment and methods used for testing continuous flow, demand and pressure demand regulators and their associated masks as well as filtered protective breathing devices; such articles of oxygen breathing or protective breathing equipment may be tested as individual components or as a complete system. This recommended practice covers but is not limited to the following types and classes of systems: Type I - mechanical breathing simulator (either bellows or piston type) only generating sinusoidal patterns; Type II - mechanical breathing simulator (generally cam-actuated, bellows or piston type or pre-programmed, servocontrolled) generating any shape of breathing pattern; and Type III - pneumatic breathing simulator pre-programmed, servocontrolled generating any shape of breathing pattern; Class A - military aircraft oxygen systems; and Class B - transport category and general aviation oxygen systems.

标准名称：	进出口食品添加剂检验规程 第4部分：消泡剂
英文名称：	Rules for the inspection of food additives for import and export—Part 4:Antifoaming agents
发布部门：	中华人民共和国国家质量监督检验检疫总局
发布日期：	2009-09-02
实施日期：	2010-03-16
首发日期：
作废日期：
主管部门：	国家认证认可监督管理委员会
提出单位：	国家认证认可监督管理委员会
归口单位：	国家认证认可监督管理委员会
起草单位：	中华人民共和国深圳出入境检验检疫局、中华人民共和国广东出入境检验检疫局
起草人：	高东微、刘津、陈永红、席静、邹志飞、李和平
出版社：	中国标准出版社
出版日期：	2010-03-16
页数：	10页
书号：	155066·2-20095

SN/T 2360的本部分规定了进出口食品添加剂(消泡剂)的技术要求、抽样、检验、结果评价、综合评定和处置及复验的原则。
本部分适用于进出口食品添加剂(消泡剂)的监督检验。

没有内容

没有内容

没有内容

© 2009-2024 标准资料网 版权所有，并保留所有权利。

北京智聚科技有限公司 Tel: 010-67123753 E-mail: kefu@infoeach.com

京ICP备14017250号-1